§ 9-26.040. Commercial and Industrial District General Development Standards

A.

CO, CN, CR, CC, CPD, CI, LI, and GI Zoning Districts and BP Overlay District. Subdivisions, new land uses and structures, and alterations to existing land uses and structures, shall be designed, constructed, and/or established in compliance with the requirements in Table 2-6, in addition to those in Sections 9-26.050 and 9-26.060 as applicable, and the applicable development standards (e.g., landscaping, parking, loading, etc.) in Article 3 (Development and Operational Standards).

B.

RCC and BP districts. Development standards for projects proposed within the RCC and BP districts shall be determined by the applicable specific plan.

TABLE 2-6 - COMMERCIAL AND INDUSTRIAL DISTRICT
GENERAL DEVELOPMENT STANDARDS

Development Feature	Requirement by Zoning District
	CO	CN	CR	CC
Minimum lot size	Minimum area and width for parcels proposed in new subdivisions.
Area	Determined through subdivision process
Width	100 ft
Setbacks	Minimum setbacks required. See Section 9-30.080 for setback measurement and exceptions to setbacks.
Front and street side	20 ft for structures more than 20 ft in height, 20 ft, plus 1 additional ft for each ft or portion thereof by which the structure exceeds 20 ft in height.			100 ft
Sides (each)	None required unless located adjacent to a residentially zoned parcel. In those cases the setback shall be 20 ft, plus 1 additional ft for each ft or portion thereof by which the structure exceeds 20 ft in height.
Rear
Height limit	Maximum allowed height of structures; see Section 9-30.060 for height measurement and exceptions to these height limits.
Primary structures	48 ft and 3 stories, except as provided by Section 9-26.050	1 story (maximum 18 feet)	35 ft	As specified by Conditional Use Permit
Accessory structures	25 ft
Minimum Landscape Coverage	15%	15%	15%	25%
Parking	As required by Chapter 9-34 (Parking and Loading Standards)
Roof Equipment	All roof-mounted equipment, vents, or ducts shall not be visible from any abutting lot or any street or roadway. This shall be accomplished in a manner that is architecturally integrated with the main building.

 

TABLE 2-6 - COMMERCIAL AND INDUSTRIAL DISTRICT
GENERAL DEVELOPMENT STANDARDS - Continued

Development Feature	Requirement by Zoning District
	CPD	CI	BP Overlay	LI	GI
Minimum lot size	Minimum area and width for parcels proposed in new subdivisions.
Area	Determined through subdivision process
Width	Determined through subdivision process			100 ft
Setbacks	Minimum setbacks required. See Section 9-30.080 for setback measurement and exceptions to setbacks.
Front and street side	20 ft for structures more than 20 ft in height, 20 ft, plus 1 additional ft for each ft or portion thereof by which the structure exceeds 20 ft in height.
Sides (each)  Rear	None required unless located adjacent to a residentially zoned parcel. In those cases the setback shall be 20 ft, plus 1 additional ft for each ft or portion thereof by which the structure exceeds 20 ft in height.
Height limit	Maximum allowed height of structures; see Section 9-30.060 for height measurement and exceptions to these height limits.
Primary structures	48 ft and 3 stories, except as provided by Section 9-26.050	48 ft	48 ft and 3 stories, except as provided by Section 9-26.050	48 ft	48 ft
Accessory structures	25 ft
Minimum Landscape Coverage	10%	10%	15%	10%	10%
Parking	As required by Chapter 9-34 (Parking and Loading Standards)
Roof Equipment	All roof-mounted equipment, vents, or ducts shall not be visible from any abutting lot or any street or roadway. This shall be accomplished in a manner that is architecturally integrated with the main building.

 

(§ 5, Ord. 1085, eff. January 6, 2006 as amended by § 3 (Exh. B), Ord. No. 1193, eff. July 19, 2012)